[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
slot accept
Syntax
slot accept slotNum [ subsystem ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Erases from NVS the type and configuration of the
previous module in the specified slot, and allows you to configure
a new module. Issue this command after you have installed a different
type of module in a slot. You can use this command only when the state
of the module in the slot is not present or disabled (mismatch). There
is no no version.
Options
-
slotNum—For ERX-7xx models,
a number in the range 0–6; for ERX-14xx models, a number in
the range 0–13; for the ERX-310 router, a number in the range
1–2; for the E120 router, a number in the range 0–5; for
the E320 router, a number in the range 0–16
-
subsystem—Type of subsystem
on the E120 and E320 routers; use when the specified slotNumber is a slot that contains an SRP module
- srp—Indicates the SC on one or both SRP modules;
specify this keyword to accept only the configuration of the portion
of the SC on the individual SRP module
- fabric—Indicates the portion of the switch fabric
on the SRP modules; specify this keyword to accept only the configuration
of an individual fabric slice
Global Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
